300 Nits ESP32 S3 Display 7 Inch Resistance Touch Screen Intelligent

• ESP32-S3 dual-core Xtensa 32-bit LX7 microprocessor, up to 240 MHz with 384KB ROM, 512KB SRAM. 2.4GHz WiFi and Bluetooth 5
• PSRAM: 8MB FLASH: 16MB
• Storage: Micro-SD card slot
• Display: 7.0-inch display with 800×480 resolution
• Touch mode, resistance touch, touch chip XPT2046
• Display interface: 16-bits, 8080 parallel communication
• Audio: Codec, Audio amplifier, speaker
• USB: 1x USB-C OTG (DFU/CDC) port, 1x USB-C debug port
• Sensors: 3-axis accelerometer, 3-axis gyroscope, temperature and humidity sensors
• Peripheral interface: I2C, SPI, GPIOs
• Miscellaneous: Reset buttons, Boot buttons
• Power Supply: 5V / 1A
• Dimension: 181 x 108 mm
• Programming Platform: Arduino-ide ESP-IDF

Application :

1. Internet of things;

2. Intelligent home;

3. Industrial control;

4. Health care;

5. Consumer electronics;

6. Automotive electronics and other applications

ESP32 7inch Display module

Development support and sample code ESP32 7inchDisplay module provides development support and sample code to enable developers to quickly start using the platform and customize it for specific applications.

Industrial Design: This module adopts industrial design, with high reliability and stability, can work in a variety of harsh environments

Esp327-inch LCD module is open source software and hardware parts, you can easily carry out secondary development and customization